Use the free text search and the search fields below to filter documents or find the document that you are looking for.
The Energy Networks Association (ENA) represents the interests of all energy companies in the UK. The Document Catalogue System is an online catalogue of engineering documents available from the ENA.
Documents available from the site include Technical Specifications, Engineering Recommendations and Reports, BEBS Specifications and reports supporting the electricity network process and policies.
Most documents are available to anybody but a small number are confidential to ENA member companies and can only be accessed by those member companies. The system allows clients that are not full ENA members to purchase documents by credit/debit card via secure transactions provided by WorldPay.
Energy Networks Association Limited4 More London RiversideLondon SE1 2AU
Tel: +44 (0)20 4599 7700Email: [email protected]
WARNING! Some of the older (pre 2003) documents available on this site were originally published by the now defunct Electricity Association. Please note that the ENA cannot take responsibility for the condition and content of these older documents and you are advised to seek advice before acting upon information held in them.
400 V a.c. switchgear, controlgear and fusegear assemblies
Aerial Bundled Conductors Insulated with Cross-Linked Polyethylene for Low Voltage Overhead Distribution
Application of ancillary electrical equipment
Code of practice for the coordination of power line carrier system frequencies in the range 30•0 kHz to 526•5 kHz
Covered-conductors for overhead lines (having rated Voltages Uo/U greater than 0.6/1 kV up to and including 19/ 33 kV)
Design and use of temporary scaffold guards and conductor support systems
Distributed Generation Connection Guide: G98 & G99
Earth rods and their connectors
Emergency rated system transformers 66/20.5 kV, 66/11.5 kV and 33/11.5 kV delta/star and star/star connected
Engineering Recommendation G100 Issue 2 Overview and Summary Guide
Environmental classification and corrosion protection of structures, plant and equipment
Environmental test requirements for protection and control equipment and systems
Fault Passage Indicators up to 132kV for Underground and Overhead Distribution Systems
Guidance on Neutral Current Diversion
Guidance on the application of Engineering Recommendation P2, Security of Supply
Insulated Aerial Bundled Conductors for Low Voltage Overhead Distribution Systems – Erection Requirements
Issue 1 – Amendment 10
Requirements for the connection of generation equipment in parallel with public distribution networks on or after 27 April 2019
Issue 3 - Amendment 8
Recommendations for the Connection of Generating Plant to the Distribution Systems of Licensed Distribution Network Operators
Low voltage heat-shrinkable material components for use up to and including 600/1 000 V
Low voltage overhead line shrouding materials
National Equipment Defect Reporting Scheme (NEDeRS®) – Notes of guidance
Operational procedure associated with electricity supplies for traction purposes on AC and DC electrified lines
Outdoor, free standing CTs & VTs up to 36 kV
Overhead line conductors - protection against corrosion by the application of anti-corrosion grease during manufacture
Public Electricity Network Distribution Assemblies
Recommendations for the safe working of utilities’ staff and other parties near light rapid transit systems
Requirements for the Application of Protective Multiple Earthing to Low Voltage Networks
Security of Supply
Specification for single circuit overhead pole lines for use at high voltage up to and including 33 kV
Standard numbering for small wiring (for switchgear and transformers together with their associated relay panels)
Stay strands and stay fittings for overhead lines
Structural testing of wood poles prior to climbing or use as a personal support
Technical Requirements for Customers’ Export and Import Limitation Schemes
Tests on power cables with XLPE insulation and metallic sheath and their accessories, for rated voltages of 66 kV (Um = 72.5 kV), 110 kV (Um 123 kV) and 132 kV (Um = 145 kV)
Aerial bundled conductors insulated with cross-linked polyethylene for low voltage overhead distribution
Calculation of fault currents in three-phase AC power systems (Application Guide to Engineering Recommendation G74)
Complexity of Distribution Circuits Operated at or above 22kV
Distribution cables of rated voltage 0.6/1/ (1.2) kV with XLPE insulation, concentric waveform copper wire and solid aluminium conductors
Distribution transformers - Part 4 Pole mounted transformers
Fittings for covered conductors for overhead lines (having rated voltages U0/U greater than 0.6/1 kV up to and including 19/33 kV)
Guidance for the operation and management of fluid filled cables. This document replaces ETR 135.
Guide to the application of Engineering Recommendation G5/4 in the assessment of harmonic voltage distortion and connection of non-linear equipment to the electricity supply system in the U.K
Guidelines for the Provision of Low Voltage Connections to Multiple Occupancy Buildings
Insulating foam-filled tube and solid rod for live working
Measures necessary to minimise corrosion damage to buried metallic structures by neighbouring cathodic protection installations
Partial discharge testing of bushings, capacitors, instrument transformers and switchgear of rated voltage 7.2 - 420 kV inclusive
Portable earthing equipment for overhead lines and substations
Power installations exceeding 1 kV a.c. – Design of high-voltage open-terminal stations
Single core cables for use in substations having extruded insulation and rated voltages of 6350/11 000 volts, and 19 000/33 000 volts
Specification for single circuit overhead lines of compact covered construction on wood poles for use at high voltage up to and including 33 kV
Specification for single circuit overhead lines on wood poles for use at 132kV
Switchgear for service up to 36 kV (Cable and Overhead conductor connected)
Switchgear for use on 66 kV to 132 kV distribution systems (Disconnectors and earthing switches)
Switchgear for use on 66 kV to 132 kV distribution systems Part 5 Inductive voltage transformers, capacitor voltage transformers, combined unit transformers and current transformers for use on 72.5 kV to 145 kV distribution systems
Type approval tests for mechanical connections to metallic sheaths of cables Addendu
XLPE covered-conductors for overhead lines (having rated voltages Uo/U greater than 0.6/1 kV up to and including 19/33 kV)
A guide for assessing the rise of earth potential at electrical installations
Amendment 7
Analysis Package For Assessing Generation Security Capability - Users' Guide
Analysis package for assessing the security contribution from distributed generation and electricity storage systems – Users’ guide
EREC G99/NI - Northern Ireland Only
Requirements for the connection of generation equipment in parallel with public distribution networks in Northern Ireland on or after 27 April 2019
Framework for contestable diversionary and reinforcement works not exceeding 33 kV - Part 7 Contestable diversionary and reinforcement works
Framework for new industrial and commercial underground connections - Part 4 Design and planning
Framework for new industrial and commercial underground connections - Part 5 Materials specification
Framework for new industrial and commercial underground connections - Part 6 Installation and records
Framework for new low voltage housing development installations - Part 1 Design and planning
Framework for new low voltage housing development installations - Part 2 Materials specification
Framework for new low voltage housing development installations - Part 3 Installation and records
Guidelines for the design, installation, testing and maintenance of main earthing systems in substations
Harmonic voltage distortion and the connection of harmonic sources and/or resonant plant to transmission systems and distribution networks in the United Kingdom
Issue 1 Amendment 4 Requirements for the connection of generation equipment in parallel with public distribution networks on or after 27 April 2019
Issue 2 Amendment 3 Recommendations for the Connection of Type Tested Small-scale Embedded Generators (Up to 16A per Phase) in Parallel with Low-Voltage Distribution Systems
Voltage fluctuations and the connection of disturbing equipment to transmission systems and distribution networks in the United Kingdom
If you are already registered on the catalogue, you are advised to login for your own convenience. You are welcome to browse the catalogue as a guest if you prefer but you must be logged in to complete an order ( Why? ).
New visitors to the catalogue can register immediately if preferred but it is equally convenient for most to browse the catalogue as a guest and register if going on to order a document.
Users from ENA member (full/associate) companies are entitled to benefits. New member users should register as such and wait for confirmation that their registration has been approved before placing orders.
Please note that all orders are completed by email.
forgotten password Remember Me